
A Windows Boot Manager error can prevent your computer from starting correctly, displaying messages such as "Bootmgr is missing" or "Windows Boot Manager could not be started." This problem can be caused by several factors, including corrupted boot files, incorrect BIOS settings, or hard drive failures.
Fortunately, there are several solutions that can fix this problem without reinstalling the operating system. From checking the BIOS settings to rebuilding the boot sector with specific commands, here you'll find all the available options to restore your PC's boot process.
What is Windows Boot Manager and why does it fail?
Windows Boot Manager is a small system software program responsible for correctly loading the operating system during the boot process . It is stored in the system reserved partition or the main disk partition and is a crucial part of Windows startup.
Errors in Boot Manager can occur for several reasons, including:
- Corrupted boot files: If the MBR (Master Boot Record) or BCD (Boot Configuration Data) is damaged, the system may fail to boot.
- Problems in the BIOS: Incorrect settings or outdated versions may interfere with booting.
- Hard drive failures: Bad sectors on the disk can cause the system to be unable to locate the files needed for booting.
- Abrupt shutdowns: Power outages or hard reboots can cause bootloader errors.
How to fix Windows Boot Manager error
There are several ways to fix this error depending on the underlying cause. Below we show you the most effective methods.
1. Initial checks and BIOS settings
Before making advanced changes to the system, it is advisable to do some basic checks:
- Restart the computer: Sometimes the error may be momentary and resolved with a simple reboot.
- Disconnect external devices: A connected USB or DVD may be interfering with the boot sequence.
- Access the BIOS: Turn on the computer and press the BIOS access key (may be F2, F10, Esc or Del depending on the brand of the equipment).
- Check the boot order: In the section Boat, make sure the primary disk is set as the first boot device.
- Reset BIOS defaults: If you suspect that the settings have been altered, look for the “Restore defaults” option and save them.
2. Use Windows Startup Repair
If your operating system won't boot, you can use the Windows Startup Repair tool:
- Insert a bootable USB with Windows installation or recovery disc.
- Boot from that device and select “Repair your computer.”
- Go to “Troubleshoot” and then “Advanced options.”
- Select “Startup Repair” and follow the on-screen instructions.
3. Rebuild the BCD and repair the MBR
If boot repair doesn't work, you can try rebuilding the MBR and BCD:
- Boot your computer from Windows installation media.
- Select “Repair your computer” and open “Command Prompt.”
- Run the following commands one by one, pressing Enter after each one:
bootrec / fixmbr
bootrec / fixboot
bootrec / RebuildBcd
Restart your computer and check if the problem has been resolved.
4. Restore the system to a previous point
If the problem arose after an update or a failed installation, you can use the system restore tool:
- Access the Windows recovery environment from installation media.
- Select “Troubleshoot” and then “Advanced Options.”
- Choose “System Restore” and follow the steps to return your system to a previous state.
If you need additional help with system settings, you can review how to remove startup programs to improve your computer's overall performance.
5. Check the hard drive for errors
If you suspect that your hard drive has bad sectors, you can scan it with the following command in the command prompt:
chkdsk / f / r
This process may take some time and will resolve disk errors. Additionally, it's recommended to check for common problems such as login errors.
6. Update the BIOS or UEFI
If your BIOS or UEFI is out of date, it can cause boot issues. To update it:
- Visit the official website of your motherboard or laptop manufacturer.
- Download the latest BIOS version.
- Follow the manufacturer's instructions to update safely.
Remember to make a backup before updating the BIOS, as an error in this process can render your computer unusable.
7. Reinstall Windows
If after trying all the solutions the problem persists, the last option is to reinstall Windows. To do this:
- Back up your important files to an external device.
- Use a bootable USB drive with your Windows installation.
- Select “Install Windows” and follow the instructions.
It is recommended to choose the option to keep files if you do not want to lose your information.
How to recover data if Windows won't boot
If your system won't boot and you need to recover files before applying more drastic solutions, you can use a Linux Live USB or remove the hard drive and connect it to another computer.
In many cases, programs like EaseUS Recovery can help you rescue data from an unbootable system.
The Windows Boot Manager error can be frustrating, but with the right methods, you can fix it without having to format your computer. There are basic BIOS tweaks and advanced commands in the Command Prompt, as well as many options available to restore your PC's boot. If none of these solutions work, you may want to consider reinstalling Windows or replacing the hard drive if there are obvious physical failures.
Table of Contents