If you've encountered Error 53 in Windows 10 when trying to access network shares, mount drives, or run programs, don't worry. This is a common problem that can have various causes, from incorrect network settings to corrupted system files.
In this article, we'll analyze in detail the reasons behind this error and provide you with step-by-step solutions so you can resolve it effectively.
What is error 53 in Windows 10?
Error 53 in Windows is often accompanied by the message "Network path not found ." This problem mainly occurs when the system cannot locate a remote computer or a shared resource on the network.
Main causes of error 53
The error can be caused by several reasons, including:
- Incorrect network configuration: If the computer is not within the correct domain or the DNS configuration is not suitable, you may not be able to find other devices on the network.
- Firewall or antivirus blocking the connection: Some security software may prevent devices from communicating properly.
- Sharing protocols disabled: If the file and printer sharing feature is disabled, access to shared folders may fail.
- System services down: Essential services such as NetBIOS over TCP/IP or SMB Client may be stopped or incorrectly configured.
How to fix error 53 in Windows 10
1. Check network connectivity
Before applying more advanced changes, make sure the connection between the devices is correct:
- Open the Symbol of the system (CMD) as administrator and type:
ping [nombre_del_equipo] - If the remote computer responds, it means there is connectivity. If it does not respond, try the IP address:
ping [dirección_IP]
If the computer responds by IP address but not by name, there may be a name resolution problem in the DNS.
2. Check the NetBIOS settings
NetBIOS is a protocol that facilitates communication between computers on the local network. You must ensure that it is enabled:
- Open the Control panel and go to Network and Internet.
- Click on Center network and sharing and select Change adapter settings.
- Right click on your active connection and select Properties.
- Choose Internet Protocol version 4 (TCP / IPv4) and click Properties.
- In the General, Click on Advanced.
- Go to the tab WINS and brand Enable NetBIOS over TCP/IP.
- Save the changes and restart the computer.
3. Turn on file and printer sharing
This service is required to access shared resources on the network:
- Open the Control panel and go to Network and Internet.
- Click on Center network and sharing.
- Choose Change advanced sharing settings.
- Activate the options Network detection y File and printer sharing.
- Save changes and try again.
4. Make sure the firewall is not blocking the connection
Some firewall rules may be preventing communication between devices.
- Open the Control panel and select Windows Defender Firewall.
- Click on Allow an app or feature through Windows Firewall.
- Look for the options File and printer sharing y SMB Client, and make sure they are activated.
- If the problem persists, try temporarily disabling your firewall to see if that is the cause.
5. Check if essential services are running
Some essential services may be disabled or inactive:
- Press Windows + R, writes
services.mscand press Enter. - Look for the following services and make sure they are set to Automatic and in execution:
- Function Detection Provider Host
- Feature Detection Resource Release
- SSDP Detection
- UPnP Host Device
- NetBIOS over TCP/IP Helper Application
- If any of them are disabled, enable the service and restart your computer.
Additional tips
- If the problem persists, try accessing the shared folder using the Symbol of the system with the command:
net use Z: \\[NombreServidor]\[RecursoCompartido] - If you are in a domain environment, verify that the computer is properly joined to the domain and that the credentials are valid.
- If the error occurs when opening programs, reinstall the affected application or check for missing files. DLL that may be causing the failure.
By following these steps, you should be able to resolve Error 53 in Windows 10 and regain access to the affected shared resources or programs.
Table of Contents