The cursed windows blue screen and a message that tells us that a problem has been detected and that our computer is going to restart. Without further explanations. When this happens, it means that we are faced with a BSOD error that crashes the operating system and sometimes also results in loss of unsaved data. In this post we are going to see how to fix Srttrail.txt BSOD error in Windows 11.
The most common thing is to come across this situation when we go to turn on our PC or when we have paused and go back to the keyboard. However, many times it happens to us while we are using it. What is happening?
BSOD errors are the main cause of nightmares for Windows users. BSOD is the acronym for Blue Screen of Death (blue screen of death), a sign that we have some problems on our computer or in the operating system that need urgent solution.
In the specific case of this error, we will find the log file in the following location:
C/Windows/System32/Logfiles/Srt/SrtTrail.txt
This route is mentioned with two options: "Turn off" and "Advanced options". You have to be very cautious, because if we choose the first option, Windows will enter an endless reboot cycle that will drive us crazy.
El srttrail.txt file It is a record that the Windows system maintains when it has not been able to start correctly. This file comes preinstalled by default in Windows 11 and cannot be downloaded from anywhere else on the internet.
Why does the srttrail.txt error occur in Windows 11?
There is no single cause for this error to occur. The truth is that it can happen for different reasons. For each of them there is a specific solution, as we will see later in this article. This is a brief listing of the most common causes:
- software problems.
- Damage to system files.
- Infection due to a virus or malware
- Hardware issues.
- Defects in peripheral devices.
This route is mentioned and presented with two options: Closing o More search options…If you choose the former, Windows will go into an endless reboot loop.
Solutions for Srttrail.txt BSOD error in Windows 11
In most cases, fixing this error is possible without having to get too complicated. Below we list a series of possible solutions, which must be tested in the order in which we present them. There they go:
Disconnect external devices
This will help us rule out peripheral failures. Many times these incompatible devices end up conflicting with the operation of the operating system, causing errors like this one. After the disconnection, we try to restart the PC and check if the srttrail.txt error in Windows 11 has already been solved. Then we connect these devices one by one to identify the source of the problem.
Try automatic repair
When this error occurs, we find the error log in this location: C/Windows/System32/Logfiles/Srt/SrtTrail.txt. There are also two options there. The one we must select is "Advanced Options", because that will give us the possibility of trying an automatic repair. The steps to follow are these:
- select "Solve problems".
- Then we will "Advanced Options".
- We click on the Symbol of the system.
- Next, we write the following command: bcdedit / set {default} recoveryenabled No and press Enter.
- Finally, we restart the PC.
Repair MBR (Master Boot Record)
The MBR (Master boot record) is he main boot record. A fundamental element to start our PC. If there is something wrong with it, it may be causing the Srttrail.txt BSOD error. This is what we can do to solve the problem:
- Again, since "Advanced Options", we open the Symbol of the system.
- Then we insert the following command: bootrec.exe / rebuildbcd and press Enter.
- Next, we write this new command: bootrec.exe / fixmbr and press Enter.
- To finish, we introduce a third and final command: bootrec.exe / fixboot. We press Enter.
- All that remains is to restart the computer and check that the error has disappeared.
Scan the disk
If all of the above has not worked, the next thing we should try is to proceed with a disk scan. SFC scan is very useful in identifying corrupt system files. When it finds one, it replaces it with a cached copy stored on the computer. These are the steps:
- As before, from "Advanced Options" we select Symbol of the system.
- We enter this command to scan the disk: sfc / scannow and press Enter.
- After completing the scan, we enter the command chkdsk / rc: to run the utility check disk.
- Finally, we restart the computer.
Reset Windows 11 to its original settings
The last option we have left, when everything we have tried or has worked, is to reset Windows 11 to factory settings. By doing this, All saved apps and settings will be deleted, although we will have the option to keep the files. A radical, although definitive, solution for this annoying error.