Although current SSD drives are very stable and have a long lifespan, the truth is that they still use the same NAND technology as USB flash drives , and that eventually fails.
It's always a good idea to back up your data, but you never know when your SSD might fail, so this short tutorial is helpful. Or at least useful for planning when you need to buy a new hard drive.
The first thing we need to know is the brand and model of our SSD . Once we know this, we go to the manufacturer's website and check the SSD's lifespan. They usually specify the supported usage time as a quantity. That is, a 60 GB SSD might have a lifespan of 80 or 120 TB, which would mean filling it up more than once. This information is important because it's what the CrystalDiskInfo program will provide.
This program is free and you can get it at this link . Installation is simple and only requires clicking "next". Once the installation is complete, launch the program and run an analysis of your SSD. After the analysis, look for an entry labeled "Total NAND Writes" or "Total Host Writes" and a number of GB. Subtract the maximum read speed specified by the manufacturer from this amount and perform the corresponding calculation.
That is, if the manufacturer tells us that the maximum is 60 TB and we have reached 30 TB in five years, then the ssd disk of our computer will have another five years; If, on the contrary, the maximum is 55 TB and the maximum is 60 TB, then it is convenient to see prices of new SSD hard drives.
As you can see, knowing the remaining lifespan of your SSD is easy , but it will always depend somewhat on how you use it and any changes in your workflow. In any case, it's easy to figure out how much life your hard drive has left , don't you think?